COMPANY PHONE: +34961667575 ADDRESS: P.I. La Reva – Avd. Els Hostalers, 2 - 46394 Ribarroja de Turia - Valencia, Spain
IMPORTANT NOTE: you can ship ITV items in two ways: a) direct shipment from ITV factory in Valencia. b) shipment from our permanent stock in Italy at BRACCHI srl Headquarter, Via Veneziana 443, 24045, Fara Gera d’Adda (Bergamo) Italy. Contacts: Luca Rizzioli, phone +390363390310, mobile +393487076645, mail luca.rizzioli@bracchi.it
INTERNAL WATER DISCHARGE PUMP AVAILABLE ON MODELS MARKED WITH “DP”.
WHAT IS IT?
Is an accessory available for all R290 machines that allows the installation of the ice machine away from the drain point and even using the drain point of the sink.
This system is installed at the factory and must be ordered with the appropriate code, which indicates DP.
WHAT IS IT USED FOR?
The discharge pump offers greater flexibility when installing an ice machine if it is located away from the drain point. The machine will be able to lift the water and give it the necessary impulse to carry it to the drain point or to the sink.
The ITV discharge pump has a capacity of 3.8L/minute, and allows water to be pumped up to 30m horizontally and 1.5m vertically.
REFRIGERANT GAS R290 GAS REFRIGERANTE R290
Eco-gas: R290 natural gas with a very low global warming potential that also reduces energy consumption.
Lifetime-machine: the R290 refrigerant is a permanent ecological alternative in the long term.
Power-save: low energy consumption, higher efficiency.
Silent-system: lower working pressure and lower machine noise.
Smart-performance: maintains better performance in hot or poorly condensed conditions.
Eco-air: ventilation system 12% more efficient than other configurations.
Electronic self-control system: total control of the machine by electronic board.
• Optimized and flexible for each machine.
• Alarm management and signaling.
• Optimization of cube harvest.
Thanks to the new R290 refrigerant, the range of ice machines significantly improves performance and energy and water consumption:
NG RANGE (Delta, Gala and Super Star): improves energy consumption by 14% and water consumption by 10%. In addition, it increases its production capacity by 5%.
SPIKA RANGE: they significantly improve their efficiency, saving an average of 25% in energy and 50% in water.
IQ RANGE: the machines increase their energy and water efficiency rates by more than 7%. In addition, their production capacity is increased by 10%.
When it comes to ice makers for professional use, the difference between air-cooled and water-cooled versions primarily lies in how they dissipate heat:
1. **Air-Cooled Ice Makers**: Use fans to circulate air over the condenser coils, expelling heat into the surrounding environment. They are more energy-efficient and less costly to operate but can be affected by ambient temperatures.
2. **Water-Cooled Ice Makers**: Use water to cool the condenser. They are more efficient in hot environments and produce ice consistently but require more water, increasing operational costs and making them less environmentally friendly.
The choice between the two depends on the specific needs and conditions of the establishment.
INTERNAL WATER DISCHARGE PUMP AVAILABLE ON MODELS MARKED WITH “DP”.
WHAT IS IT?
Is an accessory available for all R290 machines that allows the installation of the ice machine away from the drain point and even using the drain point of the sink.
This system is installed at the factory and must be ordered with the appropriate code, which indicates DP.
WHAT IS IT USED FOR?
The discharge pump offers greater flexibility when installing an ice machine if it is located away from the drain point. The machine will be able to lift the water and give it the necessary impulse to carry it to the drain point or to the sink.
The ITV discharge pump has a capacity of 3.8L/minute, and allows water to be pumped up to 30m horizontally and 1.5m vertically.
REFRIGERANT GAS R290 GAS REFRIGERANTE R290
Eco-gas: R290 natural gas with a very low global warming potential that also reduces energy consumption.
Lifetime-machine: the R290 refrigerant is a permanent ecological alternative in the long term.
Power-save: low energy consumption, higher efficiency.
Silent-system: lower working pressure and lower machine noise.
Smart-performance: maintains better performance in hot or poorly condensed conditions.
Eco-air: ventilation system 12% more efficient than other configurations.
Electronic self-control system: total control of the machine by electronic board.
• Optimized and flexible for each machine.
• Alarm management and signaling.
• Optimization of cube harvest.
Thanks to the new R290 refrigerant, the range of ice machines significantly improves performance and energy and water consumption:
NG RANGE (Delta, Gala and Super Star): improves energy consumption by 14% and water consumption by 10%. In addition, it increases its production capacity by 5%.
SPIKA RANGE: they significantly improve their efficiency, saving an average of 25% in energy and 50% in water.
IQ RANGE: the machines increase their energy and water efficiency rates by more than 7%. In addition, their production capacity is increased by 10%.
When it comes to ice makers for professional use, the difference between air-cooled and water-cooled versions primarily lies in how they dissipate heat:
1. **Air-Cooled Ice Makers**: Use fans to circulate air over the condenser coils, expelling heat into the surrounding environment. They are more energy-efficient and less costly to operate but can be affected by ambient temperatures.
2. **Water-Cooled Ice Makers**: Use water to cool the condenser. They are more efficient in hot environments and produce ice consistently but require more water, increasing operational costs and making them less environmentally friendly.
The choice between the two depends on the specific needs and conditions of the establishment.